manualshive.com logo in svg

AB Sciex QTRAP 4500 LC/MS/MS system, System User'S Manual, Page: 12 / 138

Share
Download
AB Sciex QTRAP 4500 LC/MS/MS system System User'S Manual Download Page 12

Operational Precautions and Limitations

4500 Series of Instruments

System User Guide

12 of 138

RUO-IDV-05-0264-A

•

Take care in the use and disposal of chemicals and comply with all local regulations 

to avoid potential risk of personal injury. 

•

Avoid skin contact with chemicals during cleaning, and wash hands after use.

•

Comply with all local regulations for the storage, handling, and disposal of 

biohazard, toxic, or radioactive materials.

System Safe Fluids

The following fluids can safely be used with the system.

Caution: Potential System Damage: Do not use any other fluid until confirmation is 

received from AB SCIEX that it will not present a hazard. This is not an exhaustive list.

•

Organic solvents

•

MS-grade acetonitrile; up to 100%

•

MS-grade methanol; up to 100%

•

Isopropanol; up to 100%

•

Tetrahydrofuran; up to 100%

•

Toluene and other aromatic solvents; up to 100%

•

Hexanes; up to 100%

•

HPLC-grade or higher water; up to 100%

•

Buffers

•

Ammonium Acetate; less than 1%

•

Ammonium Formate; less than 1%

•

Phosphate; less than 1% 

•

Acids and Bases

•

Formic Acid; less than 1%

•

Acetic Acid; less than 1%

•

Phosphoric Acid; less than 1%

•

Trifluoroacetic Acid; (TFA) less than 1%

•

Heptafluorobutyric Acid; (HFBA) less than 1%

•

Ammonia/Ammonium Hydroxide; less than 1%

•

Trimethylamine; less than 1%

•

Triethylamine; less than 1%

Refer to 

Service and Maintenance Information on page 119

 for information on safe cleaning 

solutions.

Summary of Contents for QTRAP 4500 LC/MS/MS system











































































































































Reviews:

No comments