manualshive.com logo in svg

AB Sciex QTRAP 4500 LC/MS/MS system, System User'S Manual, Page: 106 / 138

Share
Download
AB Sciex QTRAP 4500 LC/MS/MS system System User'S Manual Download Page 106

Operating Instructions — Analyze and Process Quantitative Data

4500 Series of Instruments

System User Guide

106 of 138

RUO-IDV-05-0264-A

2. Zoom in on the lower 10% of the peak.

3. Position the cross-hair where the start of the peak is to be defined and then drag the 

cross-hair to where the end of the peak is to be defined.
The software shades the area bounded by the base and sides of the peak. Peak 

parameters are gray as they are no longer applicable because the peak was drawn 

manually.

4. Do one of the following: 

•

To make this change permanent, click 

Accept

.

•

To discard the changes, clear the 

Manual Integration

 check box.

Item Description

1

Manual Integration mode

Figure 11-9 Peak Review Pane: Zooming in on a Peak

Item Description

1

Lower 10% of the peak

Tip!

If a peak was correct as originally selected, right-click the peak and 

then click 

Revert to Method

.

1

Summary of Contents for QTRAP 4500 LC/MS/MS system











































































































































Reviews:

No comments