Network Settings
4-45
41-001343-02 REV05 – 07.2014
Configuring VLAN (optional)
Use the following procedures to configure VLAN on the IP phone.
6.
Press the
Save
softkey.
7.
Restart the phone for the selection to take affect.
Aastra Web UI
1.
Click on
Advanced Settings->Network->Type of Service DSCP
.
2.
Select a Protocol field:
•
“SIP”
or
•
“RTP”
or
•
“RTCP”
3.
Enter a value from
0
to
63
. Default values are as follows:
•
SIP = 26
•
RTP = 46
•
RTCP = 46
Note:
If you change the ToS/DSCP setting for a Protocol, and VLAN is enabled, you will need to map the applicable priority to the Protocol setting
as shown in the first table in
“DSCP Range/VLAN Priority Mapping”
on
For more information, see the section
on
4.
Click
Save Settings
to save your settings.
Notes:
•
VLAN is disabled by default. When you enable VLAN, the IP phones use the default settings for each VLAN parameter.
You can change the default settings if required using the following procedure.
•
PC Port parameters are not applicable to the 6730i IP Phone.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
“Virtual Local Area Network (VLAN) Settings”
IP Phone UI
1.
Press
on the phone to enter the Options List.
2.
Select
Admin Menu.
IP Phone UI
