manualshive.com logo in svg

Aastra 6730I, Administrator'S Manual

Share
Download
Aastra 6730I Administrator'S Manual Download Page 196

Network Settings

 

4-49

41-001343-02 REV05 – 07.2014

For the 6867i:

19.

Press 

PC Port VLAN ID

 and then enter a value from 1 to 4095 to specify the VLAN ID for the LAN Port. Default is 

4095

.

Note:

Setting the PC Port VLAN ID to 4095 and LAN Port VLAN ID to any ID from 1 to 4094 will allow frames from the LAN port (containing a VLAN 
ID) to be untagged before being forwarded to the PC port and frames from the PC port (without a VLAN ID) to be tagged with the configured 
VLAN ID before being forwarded to the LAN port.

Example:
You enable tagging on the phone port as normal but set the PC Port VLAN ID to 4095 and the LAN Port VLAN ID to any ID from 1 to 4094. The 
following example sets the LAN port to be on VLAN 3 but the PC port is configured as untagged.

VLAN Settings->VLAN: Enable

VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 3

VLAN Settings->PC Port VLAN->PC Port VLAN ID: 4095

20.

Press 

Priority 

and then enter a value from 

0

 to 

7

 to specify the PC Port VLAN priority. Default is 

0

.

21.

Press 

 until the 

Options List 

screen displays.

22.

Press 

Restart

 to restart the phone for the change to take affect.

IP Phone UI

1.

Press 

 on the phone to enter the Options List.

2.

Press the 

Advanced

 softkey.

3.

Enter the Administrator password using the keypad. Default is “

22222

”.

4.

Select 

Network > VLAN

.

To globally enable/disable VLAN and set priority for non-IP packets:

5.

In the 

Basic Settings > VLAN

 field enable VLAN by pressing the right navigation key.

6.

In the 

LAN Port VLAN

 

> Other Priority 

field, change the non-IP priority value from 

0

 to 

7

 for non-IP packets. 

Default for this field is 

5

.

To set VLAN ID and priority for LAN Port (Port 0):

7.

In the 

LAN Port VLAN

 

> LAN Port VLAN ID

 field, enter a value from 1 to 4095 to specify the VLAN ID for the LAN Port. Default is 

1

.

Note:

Setting the LAN Port VLAN ID to 4095 and PC Port VLAN ID to any ID from 1 to 4094 will allow frames from the PC port (containing a VLAN 
ID) to be untagged before being forwarded to the LAN port and frames from the LAN port (without a VLAN ID) to be tagged with the con-
figured VLAN ID before being forwarded to the PC port.

Example:
You enable tagging on the phone port as normal but set the LAN Port VLAN ID to 4095 and the PC Port VLAN ID to any ID from 1 to 4094. The 
following example sets the PC port to be on VLAN 3 but the LAN port is configured as untagged.

VLAN Settings->VLAN: Enable

VLAN Settings->LAN Port VLAN->LAN Port VLAN ID: 4095

VLAN Settings->PC Port VLAN->PC Port VLAN ID: 3

8.

In the 

LAN Port VLAN

 

> SIP Priority 

field, enter a value from 

0

 to 

7

 to specify the SIP priority for the LAN Port. Default is 

3

.

9.

In the 

LAN Port VLAN

 

> RTP Priority 

field, enter a value from 

0

 to 

7

 to specify the RTP priority for the LAN Port. Default is 

5

.

10.

In the 

LAN Port VLAN

 

> RTCP Priority 

field, enter a value from 

0

 to 

7

 to specify the RTCP priority for the LAN Port. Default is 

5

.

To set VLAN ID and priority for PC Port (Port 1):

IP Phone UI

Summary of Contents for 6730I

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands