Aastra 6730I Page 458 Administrator'S Manual Download

Page: 458 / 888

Operational Features

5-217

41-001343-02 REV05 – 07.2014

After selecting an account, press

CHANGE

The Call Forward Mode screen displays for the account you selected. Use the

and

DOWN

arrow keys to scroll through each state type.

In the above example,

CFWD All

is enabled as indicated by a check mark (



CFWD Busy

is enabled but no call forward phone number is

configured as indicated by a

, and

CFWD No Answer

is disabled, as indicated by an

Select a state for the selected account(s) using the

and

DOWN

arrow keys.

You can enable/disable any or all of the following states for a specific account or for all accounts (with individual configurations):

•

All

- Enables

CFWD All

for an account and forwards all incoming calls for that account, to the specified number. The phone number can

be different between accounts.

•

Busy

- Enables

CFWD Busy

for an account and forwards incoming calls to a specified number if DND has been enabled for that account

OR if that account is currently engaged in another call. The phone number can be different between accounts.

•

No Answer

- Enables CFWD NoAns for an account and forwards incoming calls to a specified number if the call has not been answered for

a specified number of rings. The phone number can be different between accounts.

Note:

CFWD All

AND

CFWD Busy

AND

CFWD NoAns

are all enabled (and/or if the account has DND enabled), the

CFWD All

settings take prec-

edence over

CFWD Busy

and

CFWD NoAns

You can also use the following keys if required:

•

All Off Key

- Disables all CFWD states for the selected account.

•

All On Key

- Enables all CFWD states for the selected account.

•

CopytoAll Key

- Copies the call forward phone number and state of the selected Call Forward mode (All, Busy, No Answer) to every Call

Forward mode of that account. For example, if you have the cursor pointing at the “

All

” state and it is enabled and has a call forward phone

number configured, pressing the

CopytoAll

Key enables the

Busy

state and the

NoAns

state and assigns the same phone number to both

states.

•

Cancel Key

- Cancels any configuration you may have made without saving. To cancel a configuration, you must press this

CANCEL

key

before pressing the

DONE

key.

IP Phone UI

2.Busy !

3.No Answer X

Change CopyToAll
All Off Cancel
All On Done

Call Forward Mode

1.All

Indicates

CFWD Enabled

CFWD Disabled

Indicates
no CFWD phone
number configured

Summary of Contents for 6730I

























































































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 6730I

Reviews:

Related manuals for 6730I

Brands by name

Popular brands

Aastra 6730I, Administrator'S Manual

Search results

Summary of Contents for 6730I

Reviews:

Related manuals for 6730I

Brands by name

Popular brands