Global SIP Settings
41-001343-02 REV05 – 07.2014
4-62
Configuring Basic SIP Authentication Settings
You can configure SIP authentication settings using the configuration files, the IP Phone UI, or the Aastra Web UI.
Reference
For more information about setting the call waiting parameters, see Chapter 5, the section,
Call Waiting cannot be set via the IP Phone UI.
Note:
To configure the SIP settings per-line, use the configuration files or the Aastra Web UI.
Configuration Files
For specific parameters you can set in the configuration files, see Appendix A, the section,
or
For specific parameters you can set in the configuration files for call waiting, see the section,
or
“SIP Per-Line Call Waiting Setting”
Note:
You can set global configuration only using the IP Phone UI.
IP Phone UI
1.
Press
on the phone to enter the Options List.
2.
Select
Administrator Menu.
3.
Enter your Administrator password.
The IP Phones accept numeric passwords only.
4.
Select
SIP Settings.
5.
Select
User Name
to enter the username that appears in the name field of the SIP URI. This user name is also used for registering the phone
at the registrar.
Note:
The IP phones allow usernames containing dots (“.”). You can also enter the same user name for different registrar and proxy IP addresses.
6.
Press
Done
to save the changes.
7.
Select
Display Name
to enter the name used in the display name field of the "From SIP" header field.
8.
Press
Done
to save the changes.
9.
Select
Screen Name
and enter the name to display on the idle screen.
10.
Press
Done
to save the changes.
11.
Select
Authentication Name
to enter the authorization name used in the username field of the Authorization header field of the SIP REG-
ISTER request.
12.
Press
Done
to save the changes.
13.
Select
Password
to enter the password used to register the IP phone with the SIP proxy
.
Note:
The IP phones accept numeric passwords only.
14.
Press
Done
(3 times) to save the changes.
Note:
The session prompts you to restart the IP phone to apply the configuration settings
15.
Select
Restart.
