3D-ONE CP31, Operating Instructions Manual, Page: 3 / 53

CE Declaration of conformity
III.
i.
3D displays
Keep in mind that looking through the
built-in stereoscopic displays will block
part of your field-of-view and alter your
perception.
Seizure warning
Some viewers may experience an
epileptic seizure or stroke when exposed
to certain flashing images or lights when
viewing 3D content through the built-in
stereoscopic displays. If you or any of
your family has a history of epilepsy or
stroke, please consult with a medical
specialist before using the 3D displays.
If you experience any of the following
symptoms, immediately stop watching
3D pictures and consult a medical
specialist: (1) altered vision; (2) light-
headedness; (3) dizziness; (4) involuntary
movements such as eye or muscle
twitching; (5) confusion; (6) nausea; (7)
loss of awareness; (8) convulsions; (9)
cramps; and/or (10) disorientation.
Enclosure cooling
The CP31 camcorder uses passive
cooling by means of the external
cooling body. Blocking the cooling
area may result in excessive enclosure
temperatures which may permanently
damage the camera, result in inferior
sensor performance and injury. Ensure
that there is sufficient ventilation to cool
the camera.
Built-in magnets
The camcorder uses built-in magnets
to secure the stereoscopic viewfinders
which can interfere or disturb with
equipment sensitive to magnetic fields.
CE Declaration of
conformity
We from 3D-ONE B.V. (CCI reg. nr. NL
27346866), Niels Bohrweg 11, 2333 CA
Leiden, The Netherlands, declare that
the product: 3D-One point and shoot
3D camcorder CP31 is in conformity
with both the EMC Directive and
the Low Voltage Directive issued by
the Commission of the European
Community. Compliance with these
directives implies conformity to the
following European standards:
EN60065 : Product Safety (AC adaptor)
EN55103-1 : Electromagnetic Interference
(Emission)
EN55103-2 : Electromagnetic
Susceptibility (Immunity)
This product is intended for use in the
following Electromagnetic Environments:
E1 (residential), E2 (commercial and light
industrial).
The manufacturer of this product is
3D-ONE B.V, Niels Bohrweg 11, 2333 CA
Leiden, The Netherlands. 3D-ONE B.V. is
also the Authorized Representative for
EMC and product safety. For any service
or guarantee matters please refer to the
addresses given in separate service or
guarantee documents.
Leiden, 2010-09-07
Contact person
M. Beijersbergen
Managing Director of 3D-One B.V.