3D-ONE CP31, Operating Instructions Manual, Page: 17 / 53

Ov
erview
Data storage
9.
1.
the vergence distance will change
when zooming.
VERGENCE control (22b)
The vergence point defined by both
optics can manually be adjusted using
the potentiometer switch labelled
VERGENCE. The vergence distance
depends on the focal length of the
optics set by the ZOOM. You can adjust
the vergence distance from about 0.5 m
to infinity.
Data storage
The CP31 uses 2.5” HDD or SDD storage
media in special 3D-ONE cartridges.
The STORAGE MEDIUM can be inserted/
extracted manually when the camera is
POWERED OFF.
To remove a STORAGE MEDIUM remove
the battery first and then pull on the
medium until it comes free.
To insert a STORAGE MEDIUM push it
gently into the slot above the battery
until a ‘click’ is felt and the end of the
cartridge is flush with the enclosure (See
picture above).
The CP31 will show, when powered up,
on the TOUCHSCREEN the remaining free
disk capacity (see “[Storage] Disk free”
on page 15).
New STORAGE MEDIA can be ordered
from your supplier.
NOTE
The STORAGE MEDIUM is preformatted
by 3D-ONE. For safety reasons the CP31
offers no option to delete files stored on
the HDD/SDD or to format the HDD/SDD.
Files can be deleted only via the
network connection or when the
medium is connected directly to a
computer using a SATA USB cable.
CAUTION
EXTRACTING THE STORAGE MEDIUM
WHEN THE CAMERA IS POWERED CAN
RESULT IN DATA CORRUPTION OR
PERMANENT DAMAGE TO THE HDD/SDD.