3D-ONE CP31, Operating Instructions Manual, Page: 21 / 53

Ov
erview
Touchscreen indications and operation
13.
1.
Sensor
Shutter
- +
1/50
<< >>
Gain (dB)
- +
6
[Sensor] Gain
The gain of both sensors can be set from
0 to 12 dB, if AUTO-EXPOSURE is OFF.
NOTE
Choosing a long exposure time will
result in lower gain and smaller iris, and
therefore less noise and more depth of
focus, but might cause motion blur.
[Resolution] 1080p24/25/30
The resolution of both sensors can
be adjusted to 1080p (1920 x 1080
progressive) mode, using 24, 25 or 30
frames per second.
[Resolution] 720p25/30
The resolution of both sensors can be
adjusted to 720p (1280 x 720 progressive)
mode, using 25 or 30 frames per second.
NOTE
The field-of-view will be smaller in 720p
mode than in 1080p mode.
Resolution << >>
720P 25fps
720P 30fps
720P 24fps
1080P 25fps
1080P 30fps
1080P 24fps
[Color] Blue
The blue gain of both sensors can be
adjusted using the slider labelled BLUE.
This value is adjusted by white
balancing.
Color << >>
Blue
- +
13
Red
- +
75
Saturation
- +
0
[Color] Red
The red gain of both sensors can be
adjusted using the slider labelled RED.
This value is adjusted by white
balancing.
[Color] Saturation
The color saturation of both sensors can
be adjusted using the slider labelled
SATURATION.
[Picture] Sharpness
Picture << >>
Sharpness
- +
5
Gamma
- +
1.8
Compression
- +
weak
The digital sharpening of the output
of both sensors can be adjusted using
the slider labelled SHARPNESS. A typical
value is 7.