3D-ONE CP31, Operating Instructions Manual, Page: 23 / 53

Ov
erview
Touchscreen indications and operation
15.
1.
[Zebra] Zebra RGB/Y
The ZEBRA RGB/ button toggles between
displaying zebra patterns if either the
red, green or blue (RGB) color channel
reaches 70%/99% levels and Y mode,
where R,G,B are averaged. Y mode is
typically used.
[Storage] Disk free
The DISK FREE indicator displays
the remaining storage capacity in
gigabytes.
Storage << >>
Disk free [GB]: 161
[Focus] AF large/medium
The AF LARGE/MEDIUM button toggles
between large (full frame) and medium
(centre 50% of the sensor) auto-focus
mode.
Focus << >>
AF large
Focus suport
[Focus] Focus support
With FOCUS SUPPORT enabled the
output of the sensor will be digitally
zoomed by a factor of 2. This can be
used to facilitate manual focussing.
CAUTION
WHEN FILMING WITH FOCUS SUPPORT ON
ALSO THE RECORDED VIDEOS WILL SHOW
A DIGITALLY ZOOMED PICTURE.
[About] S/N
About << >>
S/W version: 102
Touchscreen version: 27
Firmware version: V2.00w
This indicator shows the serial number of
the touchscreen.
[About] S/W version
This indicator shows the software version
installed on the camera
[About] Touchscreen version
This indicator shows the version number
installed on the touchscreen.
[About] Firmware version
This indicator shows the firmware version
number installed on the camera.
RECORD mode
In RECORD mode the camera will
display a REC indication, date of
recording YYMMDD-HH:MM:SS, the
recording time and the remaining free
space on the recording disk.