3D-ONE CP31, Operating Instructions Manual, Page: 14 / 53

Ov
erview
6.
Camera controls
1.
Camera controls
POWER switch (14)
The POWER switch is used to power up
and down the CP31. A blue indicator
light signals the presence of power when
the switch is set to the ‘on’ position.
14.
The POWER switch will abruptly power
down the camera when set to the ‘off’
position.
CAUTION
ACTUATING THE POWER SWITCH
WHILE RECORDING WILL RESULT IN A
CORRUPTED RECORDING.
FOCUS control (3a)
3a.
The focus of both optics can
be manually adjusted using the
potentiometer switch labelled FOCUS.
You can adjust the focus from ∞ to 0.5
m by actuating the switch. Manual
focussing will automatically deactivate
the auto-focus mode (See also AF
button on p. 6).
IRIS and BRIGHTNESS
control (3b)
3b.
If auto-exposure is deactivated (see
EXP on p. 7) then the iris of both
optics simultaneously can be manually
adjusted from F=1.6 to 23.6 using the
potentiometer switch labelled IRIS. The
IRIS F/# is displayed in an insert on the
top of the viewfinder. In this mode the
GAIN can be manually set using the
touchscreen (page 13).
If auto-exposure is turned on (see EXP
on p. 7) then the IRIS control adjusts
the BRIGHTNESS. This means that the
camera will automatically adjust the IRIS
and the GAIN. The set brightness value
is displayed in an insert in the top of the
VIEWFINDER.
AF button (7a)
7.a b c d