3Com VCX V7000, Installation Manual

Page: 411 / 488

Windows 2003 Server 409
listed earlier in this topic. As you add each element, it appears in the
Current values list, above previously added values.
Add these elements in this order:
Fail-Over Call Route Point Configuration
Suboption 4 for option 184 defines the fail-over route point and the
associated dial string to be used by VCX devices in the event that neither
the VCX Primary Server nor the VCX Alternate Server are available.
For each element in Table 29 , repeat steps 4 a, b, and c, listed at the
beginning of this topic. As you add each element, it appears in the
Current values list, above previously added values.
Add these elements in this order:
Table 28 Configuring the VLAN ID
What You Type Description
3 Enter 3 as the third suboption code for option 184.
4 The length of the argument that applies to this suboption. For
option 184, suboption 3, there are two arguments:
VLAN ID: 2 bytes (possible values: 0 through 4095)
VLAN Enable: 2 bytes (possible values: 1 = enabled and
0 = disabled)
NOTE: The next two fields use example data: 25 as the VLAN ID and 1 to enable it.
Enter the appropriate information for your VLAN.
25 VLAN ID
1 VLAN is enabled
Table 29 Configuring the Fail-Over Call Route Point
What You Type Description
4 Enter 4 as the fourth suboption code for option 184.
NOTE: The next eight fields show example data. Enter the information
appropriate to your configuration.