3Com VCX V7000 Installation Manual Download Page 270

Page: 270 / 488

270

HAPTER

7: I

NSTALLING

UTHENTICATION

AND

IRECTORY

ERVER

Sample Services Configuration Script — Secondary Authentication and Directory Server

----------------------- Select System Configuration -----------------------

Individual systems may provide various services in a VCX installation. You

must select the appropriate set of services which this system is to

provide. Be certain that the selection corresponds to the functionality

you have purchased.

Which services will this system provide?

1. IP Telephony and IP Messaging Services

2. Call Records Service

3. Call Processing Services for IP Telephony

4. Authentication and Directory Services for IP Telephony

5. IP Telephony Services

6. IP Messaging Services

Enter your choice (1-6) :

Enter

to configure this server for Authentication and Directory Services

for IP Telephony. The script warns you that the choice cannot be reversed
and gives you the opportunity to change your choice.

You have chosen to configure this system to provide:

Authentication and Directory Services for IP Telephony

Note that in order for these services to work, you must have purchased an

appropriate license and installed the corresponding license activation key

on this system.

*** WARNING *** Once you confirm your selection, you cannot change it.

Are you absolutely certain that you wish to configure this system as an

'Authentication and Directory Services for IP Telephony' server? If you

answer 'no' here you can choose an alternative configuration.

Confirm selection? [no] :

yes

Enter

yes

to confirm your choice.

Selection confirmed.

The script prints several configuration messages.

Summary of Contents for VCX V7000









































































































































































































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Brands by name

Popular brands

3Com VCX V7000, Installation Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Brands by name

Popular brands