3Com VCX V7000 Installation Manual Download

Page: 185 / 488

185

Sample Network Configuration Script — Secondary IP Messaging Server (continued)

Is all of the above information correct? [yes] :

Press the Enter or Return key to accept the default answer (yes). If you
want to change any of the information, enter

End of Sample Network Configuration Script — Secondary IP Messaging Server

The script displays several status messages and immediately begins the
configuration of the system services.

----------------------- Select System Configuration -----------------------

Individual systems may provide various services in a VCX installation. You

must select the appropriate set of services which this system is to

provide. Be certain that the selection corresponds to the functionality

you have purchased.

Which services will this system provide?

1. IP Telephony and IP Messaging Services

2. Call Records Service

3. Call Processing Services for IP Telephony

4. Authentication and Directory Services for IP Telephony

5. IP Telephony Services

6. IP Messaging Services

Enter your choice (1-6) :

Enter

to configure this server for IP Messaging Services. The script

warns you that the choice cannot be reversed and gives you the
opportunity to change your choice.

You have chosen to configure this system to provide:

IP Messaging Services

Note that in order for these services to work, you must have purchased an

appropriate license and installed the corresponding license activation key

on this system.

*** WARNING *** Once you confirm your selection, you cannot change it.

Summary of Contents for VCX V7000









































































































































































































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Installation Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands