3Com VCX V7000 Installation Manual Download

Page: 248 / 488

248

HAPTER

6: I

NSTALLING

ALL

ECORDS

ERVER

Sample Services Configuration Script — Call Records Server (continued)

Enter

to configure this server for Call Records Services. The script warns

you that the choice cannot be reversed and gives you the opportunity to
change your choice.

You have chosen to configure this system to provide:

Call Records Service

Note that in order for these services to work, you must have purchased an

appropriate license and installed the corresponding license activation key

on this system.

*** WARNING *** Once you confirm your selection, you cannot change it.

Are you absolutely certain that you wish to configure this system as an

'Call Records Service' server?If you answer 'no' here you can choose an

alternative configuration.

Confirm selection? [no] :

yes

Enter

yes

to confirm your choice.

Selection confirmed.

The script prints several configuration messages.

----------------------------------------------------------------------------

------------- Welcome to the VCX Service Configuration Wizard --------------

----------------------------------------------------------------------------

This wizard sets up VCX services.

Do you wish to configure services at this time? [Y] :

Press the Enter or Return key to accept the suggested answer (Y).

------------------------- Configuring VCX Services -------------------------

This server runs the Call Records Service.

Services running on this server need to communicate with other servers and

devices in order to operate. In the next series of questions, you will be

asked for information about these external services and devices, and for

other global parameters.

The Call Records Service consolidates call accounting records for the VCX

system. It is only enabled on one server for an entire installation.

Summary of Contents for VCX V7000









































































































































































































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Installation Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands