3Com VCX V7000, Installation Manual

Page: 77 / 488

77
Sample Services Configuration Script — Primary Server (continued)
VCX Authentication & Directory Services can provide support for System
Speed Dials. This feature must be enabled only at a single site, and if
replication is in use, the setting must be the same on the primary and
secondary servers for that site.
Enable System Speed Dial Master? [N] :
■
At a single site, enter Y for the primary server and remember to
answer Y when you configure the associated secondary server.
■
For regional offices that have no branch offices, you must configure
the two servers in one of the regional offices as System Speed Dial
Master servers. Answer Y for only one pair of servers in one regional
office.
Do you wish to change any of the Auth & Dir Service parameters? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script presents each of the items that you
have entered during the most recent part of the script and allows you to
accept the value or change it.
------------ Configuring additional parameters for Common Agent ------------
The Trap Destination specifies the IP address to be used as a destination
when this system sends SNMP traps. If more than one trap destination is
desired, you will have an opportunity to add others later.
Trap Destination :
Enter the IP address of the PC or other system on which you are running
your network management software (for example, EMS).
The Trap Community String provides a community string to be used when
sending SNMP traps to the trap destination.
Trap Community String : public
CAUTION: Press the Enter or Return key to accept the default answer
(public). 3Com strongly recommends that users change this string for
security reasons.