3Com VCX V7000, Installation Manual

Page: 302 / 488

302 C
HAPTER
9: I
NSTALLING
D
EVICES
7 In the Hyperterm window, enter this command to set the IP address of
the Primary VCX Server:
nbxSetNcpIpAddress 10.20.30.41
All IP addresses and subnetwork masks used here are examples only. You
must use values appropriate for your network.
At any time, you can verify the current configuration by entering this
command:
nbxShowConfig
8 Enter this command to set the IP address of the Secondary VCX Server:
vcxSetAltCallPIP 10.20.30.42
9 Enter this command to set the dialing domain for the Attendant Console:
vcxSetDialDomain 1.1.1.1
10 To assign an IP address that you select to the Attendant Console:
nbxSetIpAddress 192.168.10.101
11 To define the subnetwork mask for this subnetwork:
nbxSetSubnetMask 255.255.255.0
12 To define the IP address for the gateway on this subnetwork:
nbxSetGatewayAddress 192.168.10.254
13 To configure a specific virtual LAN (VLAN) for the 3105A Attendant
Console, enter this command:
vcxSetVlanConfig <Mode> <ID>
Mode Values:
■
0 = Disable
■
1 = Enable
ID Values:
■
Integer. Range = 0-4095.
■
Example Commands:
vcxSetVlanConfig 1 2
This command Enable VLAN operation on the virtual LAN with ID = 2.
vcxSetVlanConfig 0
This command disables VLAN operation.
14 Enter this command to restart the Attendant Console: