3Com VCX V7000, Installation Manual

Page: 116 / 488

116 C
HAPTER
2: I
NSTALLING AN
IP T
ELEPHONY AND
M
ESSAGING
S
ERVER
Sample Services Configuration Script — Branch Office Server (continued)
Common Agent supports a management station authentication feature.
Answering 'Y' here will allow only a set of pre-identified SNMP management
stations to manage the system. (You will be able to enter IP addresses of
authorized management stations next. Authorized management stations can
also be configured using EMS or another management station at a later
point.)
Enable management station authentication? [N] :
Press the Enter or Return key to accept the default answer (N). To enable
management station authentication, enter
Y . If you answer Y, the script
prompts you for the IP addresses of up to four authorized network
management stations.
Do you wish to change any of the Common Agent parameters? [N] :
Review the information for accuracy and if it is correct, press the Enter or
Return key. If you want to change any of the information, enter
Y .
----------------------------------------------------------------------------
Initial VCX configuration is now complete. Before the information just
entered is saved, you have the option of reviewing and changing parameters
for each VCX service at a detailed level. This is not needed in most cases
and is recommended only for advanced users.
Do you wish to review service parameters in detail? [N] :
Press the Enter or Return key to accept the default answer (N). If you
answer Y to this question, the script enters a mode in which you can
review and modify low-level configuration parameters for each service.
This is
not needed for standard configurations and using it successfully
requires substantial VCX configuration expertise. 3Com does not support
this mode of making configuration changes.
----------------------------------------------------------------------------
Please wait while the wizard completes.
The script now saves all of the configuration parameters, displays several
status messages, and exits.
End of Sample Services Configuration Script — Branch Office Server