3Com VCX V7000, Installation Manual

Page: 370 / 488

368 A
PPENDIX
B: A
UTOMATED
B
RANCH
O
FFICE
I
NSTALLATION
Sample V6100 Media Gateway Configuration File
;**************
;** Ini File **
;**************
Typically, an INI file is produced by exporting the file from a working
V6100 (Digital) Integrated Branch server. The export process records
several system parameters as comment lines at the beginning of the INI
file. Modify these comment lines when you create INI files for other
V6100 servers so that the files reflect the parameters of the target unit.
;Board: Mediant 1000
;Serial Number: 667294
;Slot Number: 1
;Software Version: 4.80A.022.005
;Board IP Address: 10.230.189.133
;Board Subnet Mask: 255.255.255.0
;Board Default Gateway: 10.230.189.1
;Ram size: 128M Flash size: 32M
;Num DSPs: 32 Num DSP channels: 96
;Profile: NONE
;------------------------------
[SYSTEM Params]
DisableSNMP = 1
Set DisableSNMP to 1 if you do not want to send SNMP trap information
from the V6100 to any SNMP management station(s). If you set it to 0,
you can then specify up to 5 management stations. For each station that
you want to specify, set the SNMPManagerIsUsed value to 1 and enter
the IP address on the corresponding SNMPManagerTableIP line.
DNSPriServerIP = 151.104.230.51
DNSSecServerIP = 151.104.230.59
EnableSyslog = 1
[BSP Params]
PCMLawSelect = 3
Specify the analog signal compression algorithm:
■
1 — A-law. Usually A-Law is used for E1 spans
■
3 — µ-Law. For T1 and J1 spans.