manualshive.com logo in svg

3Com VCX V7000, Installation Manual

Share
Download
3Com VCX V7000 Installation Manual Download Page 345

Configuration Files

343

Sample vcx-createcfg Script (continued)

Enable UPS monitoring? [N]                              : 

Press the Enter or Return key to accept the default answer (N). You can 
deploy a UPS in either a branch office or regional configuration. For the 
current VCX software release, 3Com Corporation supports UPS hardware 
from American Power Conversion (APC) Corporation. (For a list of 
supported APC UPS devices, consult with your 3Com Service 
Representative or your 3Com Voice Authorized Reseller.) If you answer Y 
to this question, the script prompts you with further questions about your 
UPS configuration.For an example of these questions, see 

“Configuring a 

Primary IP Telephony Server (Single Site)”

 in 

Chapter 3

.

----------- Configuring additional parameters for Call Processor -----------

Trusted Endpoints are allowed to send SIP Notify messages to the Call

Processor.  Certain Trusted Endpoints are configured automatically. 

Additional Trusted Endpoints can be entered here.  Enter a blank input to

indicate that all endpoints have been entered.

Additional Trusted Endpoint IP address

TrustedAddress                                          : 

Enter the IP address of any SIP devices or servers that you want the VCX 
Call Processing Servers to treat as trusted endpoints. When you have 
finished, press the Enter or Return key when prompted for another IP 
address.

Do you wish to change any of the Call Processor parameters? [N] : 

Press the Enter or Return key to accept the default answer (N), or enter 

Y 

to change one or more of the values.

-------- Configuring additional parameters for IP Messaging Service --------

When multiple IP Messaging systems are in use, for example at a region and

one or more branches, the Global Voicemail capability allows these systems

to act as a single unified voicemail system.  Say 'yes' here if this system

participates in Global Voicemail.

Is Global Voicemail enabled? [N]                        : 

Press the Enter or Return key to accept the default answer (Y) if you want 
to use Global Voicemail.

IP Messaging includes an optional ability to archive messages to an

external server.

Summary of Contents for VCX V7000









































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands