3Com VCX V7000, Installation Manual

Page: 341 / 488

Configuration Files 339
Sample vcx-createcfg Script (continued)
Enter a unique identifier for this site :
Enter an identification string for the site at which the IP Telephony server
is located.
The Customer Name identifies the company using this VCX system.
Enter the customer name :
Enter the name of your company.
Use European date order? (Y/N) [N] :
Press the Enter or Return key to accept the default answer (N). To use the
European date order, enter
Y.
In order to support "ad-hoc" conferences with more than 3 participants, the
Adhoc Conference Service is used. This service should be enabled on this
server, unless another server dedicated to Adhoc Conferencing will be used
instead. If available, a separate server typically provides greater
capacity and may be shared among sites.
Use the Adhoc service on this server? (Y/N) [Y] :
Press the Enter or Return key to accept the default answer (Y). If you do
not want to use the Adhoc Conference Service, enter
N.
CAUTION: Conferences of more than 6 participants may degrade overall
system performance.
The SIP default dialing domain is used to construct the SIP URI for
outbound SIP requests.
Enter the SIP default dialing domain : 1.1.1.1
VCX systems require 1.1.1.1 as the default dialing domain. Press the
Enter or Return key to accept the default value.
The secondary Call Processor acts as a backup if the primary is down or
unreachable.
IP address of the secondary Call Processor :
Call Processor tasks are associated with the eth1 Ethernet interface. Enter
the IP address of eth1 on the Secondary Call Processor Server (typically
located in the regional office with which the target branch office IP
Telephony Server is associated).