3Com VCX V7000 Installation Manual Download

Page: 186 / 488

186

HAPTER

4: I

NSTALLING

IP M

ESSAGING

ERVER

Sample Services Configuration Script — Secondary IP Messaging Server (continued)

Are you absolutely certain that you wish to configure this system as an 'IP

Messaging Services' server? If you answer 'no' here you can choose an

alternative configuration.

Confirm selection? [no] :

yes

Enter

yes

to confirm your choice.

Selection confirmed.

The script prints several configuration messages.

----------------------------------------------------------------------------

------------- Welcome to the VCX Service Configuration Wizard --------------

----------------------------------------------------------------------------

This wizard sets up VCX services.

Do you wish to configure services at this time? [Y] :

Press the Enter or Return key to accept the suggested answer (Y).

------------------------- Configuring VCX Services -------------------------

This system runs IP Messaging services.

Please enter the role of this system:

1 - This is a regional office, primary IP Messaging server.

2 - This is a regional office, secondary IP Messaging server.

3 - This is a branch office IP Messaging system.

4 - This system is a client in an IPMSG client-server deployment.

5 - This system operates standalone.

Enter your choice by number [1] :

Enter

to configure this server as the Secondary IP Messaging server.

Services running on this system need to communicate with other systems and

devices in order to operate. In the next series of questions, you will be

asked for information about these, and for other global parameters.

The site ID is a unique value which identifies a particular site in a

multi-site VCX installation. It is a string of up to 22 characters,

consisting of letters and/or numbers. No punctuation characters, spaces,

or tabs may be used.

Summary of Contents for VCX V7000









































































































































































































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Installation Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands