3Com VCX V7000, Installation Manual

Page: 167 / 488

167
Sample Network Configuration Script — Primary IP Messaging Server (continued)
Use DHCP on eth0 to configure network parameters? [yes] : no
Enter no to specify the IP addresses manually.
-------------------------- Configuring Hostname ---------------------------
Enter system hostname :
Enter the unqualified name that you want to use for this primary server.
Unqualified host names must conform to the rules outlined in
“Host
Names” in Chapter 4 .
--------------------- Configuring IP Interface 'eth0' ---------------------
IP Address :
Network Subnet Mask :
Default Gateway Address :
Enter the IP address for this server’s eth0 interface and the subnet mask
and default gateway IP address appropriate for this site.
--------------------- Configuring IP Interface 'eth1' ---------------------
Interface State : enabled
Change the default value (disabled) to enabled.
IP Address :
Network Subnet Mask :
Default Gateway Address :
Enter the IP address for this server’s eth1 interface and the subnet mask
and default gateway address appropriate for this site.
------------------------- Configuring DNS Servers -------------------------
Enter DNS servers one at a time.
When done, enter 0.0.0.0 to stop.
Primary DNS Server :
Secondary DNS Server :
Tertiary DNS Server :
Enter up to three DNS server IP addresses.
----------------------- Configuring DNS Search Path -----------------------
Press Enter to leave the current path unchanged, or specify
a new search path, with spaces separating each entry.
DNS Search Path :
Enter the DNS search path appropriate for this site.