3Com VCX V7000 Installation Manual Download

Page: 254 / 488

254

HAPTER

7: I

NSTALLING

UTHENTICATION

AND

IRECTORY

ERVER

Configuring a Primary Authentication and Directory Server

To begin the configuration process, enter this command:

vcx-setup

The network configuration portion of the script starts.

Sample Network Configuration Script — Primary Authentication and Directory Server

---------------------------------------------------------------------------

------------- Welcome to the VCX Network Configuration Wizard -------------

---------------------------------------------------------------------------

This wizard sets up networking and related services.

Configure networking now? [yes] :

Press the Enter or Return key to accept the suggested answer (yes).

--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------

VCX servers can use DHCP for automated configuration, but this requires

that the DHCP server is configured to provide the proper options. Unless

you know that your environment is set up in this way, you should say 'no'

here and configure static network parameters.

Use DHCP on eth0 to configure network parameters? [yes] :

Enter

to specify the IP addresses manually.

-------------------------- Configuring Hostname ---------------------------

Enter system hostname :

Enter the unqualified name that you want to use for this primary server.
Unqualified host names must conform to the rules outlined in

“Host

Names”

Chapter 7

--------------------- Configuring IP Interface 'eth0' ---------------------

IP Address :

Network Subnet Mask :

Default Gateway Address :

Enter the IP address for this server’s eth0 interface and the subnet mask
and default gateway IP address appropriate for this site.

--------------------- Configuring IP Interface 'eth1' ---------------------

Interface State : enabled

Change the default value (disabled) to enabled.

Summary of Contents for VCX V7000









































































































































































































































































































































































































































































































Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands

3Com VCX V7000, Installation Manual

Search results

Summary of Contents for VCX V7000

Reviews:

Related manuals for VCX V7000

Brands by name

Popular brands