ZyXEL Communications SLC1224, Руководство пользователя

Страница: 38 / 133

SLC1224 User’s Guide
38 Chapter 3 G.SHDSL Port Setup
Figure 12 Port Channel Setup
The following table describes the labels in this screen.
3.8.1 Port Channel Add or Edit
Do the following to open the Add or Edit Channel Setup screen:
1 Click Port Setup in the navigation panel and then the G.SHDSL line card’s link to open
the SLC Port Setup screen.
2 Click a port's index number to go to the SLC Edit Port Setup screen.
3
Click Channel Setup in the SLC Edit Port Setup screen to go to the port's Channel
Setup screen.
Table 9 Port Channel Setup
LABEL DESCRIPTION
VC Profile Click this link to go to the VC Profile Setup screen.
Edit Port Setup Click this link to go to the Edit Port Setup screen.
VPI/VCI This field displays the Virtual Path Identifier (VPI) and Virtual Circuit Identifier
(VCI). The VPI and VCI identify a channel on this port.
Click a link in the VPI/VCI column to open a screen where you can edit the VPI/VCI
settings.
PVID This is the PVID (Port VLAN ID) assigned to untagged frames or priority frames (0
VID) received on this channel.
An asterisk (*) denotes a super channel.
Priority Type the priority value (0 to 7) to add to incoming frames without a (IEEE 802.1p)
priority tag.
VC Profile This shows which VC profile the channel is set to use.
Add Click this button to configure a new channel.
Delete Select a channel’s Delete check box and click the Delete button to remove the
channel.