ZyXEL Communications SLC1224, Руководство пользователя

Страница: 93 / 133

SLC1224 User’s Guide
Chapter 8 Commands Overview 93
igmpfprofile set <profile>
<index>
<start_ip>
<end_ip>
Configures an IGMP filter profile.
delete
<profile>
Removes an IGMP filter profile.
list
Displays an IGMP filter profile’s
settings.
map <profile>
Displays which DSL ports reference
this IGMP filter profile.
igmpfilter set <slot-port>
<profile>
Sets a DSL port(s) to use an IGMP
filter profile.
list <slot>
Displays which IGMP filter profile a
line card’s DSL port(s) is using.
config convert
Backward compatibility command.
command
<slot>
lineinfo
<port>
Displays the statistics of the specified
DSL ports.
lineperf
<port>
Displays the line quality of the
specified DSL port.
loopback
<port> <f5>
<vpi> <vci>
Performs an OAMF5 loopback test on
a virtual circuit on the specified DSL
port.
loopback
<port>
<local>
Performs a local loopback test on the
specified DSL port.
list port
<port>
Displays line settings.
list ports
Displays line settings on all ports.
stat ch
<port> <vpi>
<vci>
Displays channel status of a DSL line
on a virtual circuit .
stat chs
<port>
Displays channel status of a DSL line.
hmon
Displays the hardware monitor’s
statistics.
smcast set <slot-
port>
<xx:xx:xx:xx:
xx:xx>
<join|leave>
Use join/leave to add/ remove
multicast MAC addresses (up to ten)
on specified DSL ports, a range of
DSL ports or all DSL ports.
delete
<xx:xx:xx:xx:
xx:xx>
Removes a static multicast filter entry
by deleting the associated MAC
address.
list
Display all MAC addresses joined to
DSL ports.
Table 39 Engineer Shell Commands (continued)
COMMAND DESCRIPTION