ZyXEL Communications SLC1224, Руководство пользователя

Страница: 96 / 133

SLC1224 User’s Guide
96 Chapter 9 SHDSL Port Commands
set shdsl
<profile> <max
rate> <min
rate> anxa|anxb
[2wire|4wire|mp
air4 lp_off
|lp_on_curr[=<v
alue>]|lp_on_wc
[=<value>]]
Creates a line profile.
<value> is -10~21 dB
At the time of writing, if you enable line
probing when using 4- or 8-wire mode,
the connection to a CPE device may
fail.
delete
<adsl|shdsl>
<profile>
Removes a line profile.
map
<adsl|shdsl>
<profile>
Displays a profile’s port mapping.
vcprofile show
Shows a virtual channel profile’s
contents.
set <vcprofile>
<llc|vc>
<aal_num>
<cbr|vbr|ubr>
<opt_param>
Creates a virtual channel profile.
delete
<vcprofile>
Removes a virtual channel profile.
map <vcprofile>
Displays a virtual channel profile’s port
mapping.
pvc show
Displays PVC settings.
set <slot-port-
vpi/vci>
<super|vid=<vid
>>[llc|vc|vcpro
file=<vcprofile
>][priority=<pr
i>]
Creates or modifies a PVC setting.
delete <slot-
port-vpi/vci>
Removes a PVC setting.
pvid show <slot>
Displays port PVID settings.
set <slot-port>
<pvid>
Sets a port’s default VID.
priority show <slot>
Displays port default priority settings.
set <slot-port>
<priority>
Sets a port’s default priority.
frametype show <slot>
Displays frame type tag settings.
set <slot-port>
<all|tag>
Sets the frame type for a specific port.
pktfilter show <slot>
Displays packet type filter settings.
Table 40 Port Commands (continued)
COMMAND DESCRIPTION