ZyXEL Communications SLC1224, Руководство пользователя

Страница: 65 / 133

SLC1224 User’s Guide
Chapter 4 IEEE 802.1Q VLAN 65
The following table describes the labels in this screen.
4.2.2 SLC Management VLAN Edit
Click VLAN Setup in the navigation panel and then a card’s link in the VLAN Setup screen.
Click the management VLAN ID in the SLC VLAN Static Entry Setup screen to open this
screen.
Table 27 Add VLAN Static Entry
LABEL DESCRIPTION
Up Click this link to go to the card's VLAN Static Entry Setup screen.
VLAN ID This is the number that identifies the VLAN group. When you add a static VLAN,
type a number (1-4094) to identify the VLAN. When you edit a static VLAN, you
cannot change this number.
Active Select this check box to enable this VLAN when you click Apply below. Clear this
check box and click Apply below to disable this VLAN without having to delete it.
Port Number This field displays the port number.
normal Select normal registration for the associated port if you want that port to join this
VLAN group using GVRP, this item is not available on the SLC.
fixed Fixed registration ports are permanent members of this VLAN group.
forbidden Select forbidden for a port to block that port from joining this VLAN group.
TX Tagging Select TX Tagging registration for the associated port if you want that port to tag
all outgoing frames transmitted. Only select this if the subscriber's DSL modem or
router supports 802.1Q VLAN.
Apply Click Apply to save your changes back to the line card.
Reset Click Reset to begin configuring this screen afresh.