ZyXEL Communications SLC1224, Руководство пользователя

Страница: 111 / 133

SLC1224 User’s Guide
Chapter 9 SHDSL Port Commands 111
The following example turns on the MAC count filter on DSL port 1 on the line card in slot 3.
Figure 57 MAC Count Enable Command
9.4.19 MAC Count Disable Command
Syntax:
lcman port macccount disable <slot-port>
where
This command disables the MAC filtering feature on a specific port or on all ports if no port is
specified.
The following example turns off the MAC count filter on DSL port 1 on the line card in slot 3.
Figure 58 MAC Count Disable Command
9.4.20 MAC Count Set Command
Syntax:
lcman port maccount set <slot-port> <count>
where
ras> lcman port maccount enable 3-1
<slot-port>
= The number of the slot where the line card is located and the
number of a DSL port.
ras> lcman port maccount disable 3-1
<slot-port>
= The number of the slot where the line card is located and the number
of a DSL port.
<count>
Set the limit for how many MAC addresses that a port may
dynamically learn.
For example, if you are configuring port 2 and you set this field to
"5", then only five devices with dynamically learned MAC
addresses may access port 2 at any one time. A sixth device would
have to wait until one of the five learned MAC addresses ages out.
The valid range is from “1” to “1024”.