ZyXEL Communications SLC1224, Руководство пользователя

Страница: 118 / 133

SLC1224 User’s Guide
118 Chapter 9 SHDSL Port Commands
Figure 67 IGMP Filter Set Command Example
9.4.30 IGMP Filter Profile Set Command
Syntax:
lcman port igmpfprofile set <profile> <index> <startip> <endip>
where
This command configures an IGMP filter profile.
The following example configures an IGMP filter profile named voice with a range of
multicast IP addresses (index 1) from 224.1.1.10 to 224.1.1.44.
Figure 68 IGMP Filter Profile Set Command Example
9.4.31 IGMP Filter Profile Show Command
Syntax:
lcman port igmpfprofile show [<profile>]
where
This command displays an IGMP filter profile’s settings.
ras> lcman port igmpfilter set 4-1 voice
<profile>
= Specify a name to identify the IGMP filter profile (you cannot
change the name of the DEFVAL profile). You can use up to 31
ASCII characters; spaces are not allowed.
<index>
= The number (1~16) to identify a multicast IP address range.
<startip>
Type the starting multicast IP address for a range of multicast IP
addresses that you want to belong to the IGMP filter profile.
<endip>
Type the ending multicast IP address for a range of IP addresses
that you want to belong to the IGMP filter profile.
If you want to add a single multicast IP address, enter it as both
the
startip
and
endip
.
ras> lcman port igmpfprofile set test1 1 224.1.1.10 224.1.1.44
[<profile>]
= The name of an IGMP filter profile.