ZyXEL Communications SLC1224, Руководство пользователя

Страница: 125 / 133

SLC1224 User’s Guide
Chapter 10 Troubleshooting 125
2 Connect your computer to the console port and use terminal emulation software
configured to the following parameters:
3 Pull out the line card and push it back in to restart it and begin a session.
4 When you see the
Press any key to enter Debug Mode within 3 seconds
message
,
press a key to enter debug mode.
5 Type
atba5
after the
Enter Debug Mode
message (this changes the console port speed
to 115200 bps).
6 Change the configuration of your terminal emulation software to use 115200 bps and
reconnect to the line card.
7 Type
atur
after the
Enter Debug Mode
message.
8 Wait for the
Starting XMODEM upload
message before activating XMODEM upload
on your terminal.
9 This is an example Xmodem configuration upload using HyperTerminal. Click Transfer ,
then Send File to display the following screen.
Figure 74 Example Xmodem Upload
• VT100 terminal emulation • 9600 bps
• No parity, 8 data bits, 1 stop bit • No flow control
Type the firmware file's
location, or click Browse to
search for it.
Choose the 1K Xmodem
protocol.
Then click Send .