ZyXEL Communications SLC1224, Руководство пользователя

Страница: 35 / 133

SLC1224 User’s Guide
Chapter 3 G.SHDSL Port Setup 35
Figure 11 SLC Edit Port Setup
The following table describes the labels in this screen.
Table 8 SLC Edit Port Setup
LABEL DESCRIPTION
Channel Setup Click this link to go to the port's Channel Setup screen.
Up Click this link to go to the card's Port Setup screen.
Name Enter information to identify the subscriber connected to this DSL port. You can
use up to 31 printable ASCII characters (including spaces and hyphens).
Phone number Enter information to identify the telephone number of the subscriber connected to
this DSL port. You can use up to 15 ASCII characters (including spaces and
hyphens).
Active Select this check box to turn on this G.SHDSL port. The G.SHDSL ports are
disabled by default because an enabled but disconnected G.SHDSL port
generates more heat than an operating port. Disable G.SHDSL ports when they
are not in use to minimize heat generation and enhance reliability.
Default 802.1p
Priority
Type the priority value (0 to 7) to add to incoming frames without a (802.1p) priority
tag.
Profile Use the drop-down list box to select a profile of G.SHDSL settings to assign to this
port. A profile is a list of settings that you define and then assign to individual ports.
IGMP Filter Profile The IGMP filter profile defines which multicast groups a port can join. Select a
profile of IGMP filter settings to assign to this port.
Default VLAN ID Default VLAN ID is the PVID (Port VLAN ID) assigned to untagged frames or
priority frames (0 VID) received on this port.