ZyXEL Communications SLC1224, Руководство пользователя

Страница: 89 / 133

SLC1224 User’s Guide
Chapter 8 Commands Overview 89
8.4 Engineer Shell Commands with MSC
The engineer shell commands are backwards compatible with the command structure of
earlier versions of the management switch card’s firmware.
The following table lists all of the engineer shell commands that you can use with the line card
when you use the management switch card..
delete
<xx:xx:xx:xx:
xx:xx>
Removes a static multicast filter entry
by deleting the associated MAC
address.
show
Display all MAC addresses joined to
DSL ports.
command
<slot>
lineinfo
<port>
Displays the statistics of the specified
DSL ports.
lineperf
<port>
Displays the line quality of the
specified DSL port.
loopback
<port> <f5>
<vpi> <vci>
Performs an OAMF5 loopback test on
a virtual circuit on the specified DSL
port.
loopback
<port>
<local>
Performs a local loopback test on the
specified DSL port.
list port
<port>
Displays line settings.
list ports
Displays line settings on all ports.
stat ch
<port> <vpi>
<vci>
Displays channel status of a DSL line
on a virtual circuit .
stat chs
<port>
Displays channel status of a DSL line.
hmon
Displays the hardware monitor’s
statistics.
config save
Saves the current configuration.
Table 38 Standard Shell Commands (continued)
COMMAND DESCRIPTION
Table 39 Engineer Shell Commands
COMMAND DESCRIPTION
lcman status
Shows the status of the line cards.
dot1x enable Turns on IEEE 802.1X.
disable
Turns off IEEE 802.1X.
port enable <slot-
port>
Turns on IEEE 802.1X for specific
subscriber ports.