ZyXEL Communications SLC1224, Руководство пользователя

Страница: 97 / 133

SLC1224 User’s Guide
Chapter 9 SHDSL Port Commands 97
set <slot-port>
<pppoe-only|
accept-all>,
or
set <slot-port>
<[arp]|[dhcp]|[
eapol]|[pppoe]|
[netbios]|[igmp
]>
Sets the packet type filter for a specific
port.
macfilter show <slot>
Displays MAC filter settings.
enable <slot-
port>
Turns on the MAC filter.
disable <slot-
port>
Turns off the MAC filter.
set <slot-port>
<xx:xx:xx:xx:xx
:xx>
Adds a MAC filter MAC entry.
delete <slot-
port>
<xx:xx:xx:xx:xx
:xx>
Removes a MAC filter MAC entry.
maccount show <slot>
Displays the MAC count filter settings.
MAC count limits the number of MAC
addresses that can connect to a
subscriber port.
enable <slot-
port>
Turns on MAC count limiting on the
specified subscriber ports.
disable <slot-
port>
Turns off MAC count limiting on the
specified subscriber ports.
set <slot-port>
<count>
Sets the MAC count limit number (1-
1024) on the specified subscriber
ports.
isolate [<enable|disabl
e>]
Enables or disables port isolation (All
connected).
dot1x show <slot>
Displays IEEE 802.1X settings.
enable <slot-
port>
Turns on IEEE 802.1X for specific
subscriber ports.
disable <slot-
port>
Turns off IEEE 802.1X for specific
subscriber ports.
control <slot-
port>
<auto|auth|unau
th>
Sets the IEEE 802.1X port
authentication option for specific
subscriber ports.
auto = authentication required
auth = forced authentication
unauth = forced no authentication
Table 40 Port Commands (continued)
COMMAND DESCRIPTION