ZyXEL Communications SLC1224, Руководство пользователя

Страница: 116 / 133

SLC1224 User’s Guide
116 Chapter 9 SHDSL Port Commands
where
This command sets how often a subscriber has to re-enter his or her username and password to
stay connected to the specified port.
The following example sets the line card to require each subscriber connected to DSL port 1
on the line card in slot 3 to periodically re-enter his or her username and password every
43,200 seconds (12 hours) to stay connected.
Figure 65 Dot1x Period Command Example
9.4.28 IGMP Filter Show Command
Syntax:
lcman port igmpfilter show <slot>
where
This command displays which IGMP filter profile a DSL port(s) is using.
The following example displays which IGMP filter profile the DSL ports on the line card in
slot 4 is using.
<slot-port>
= The number of the slot where the line card is located and the number
of a DSL port.
<seconds>
How often (60~65535 seconds) a subscriber has to re-enter his or
her username and password to stay connected to the port.
ras> lcman port dot1x period 3-1 43200
<slot>
= The number of the slot where the line card is located.