4-REAR WHELL COMPONENT
22
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1230100-455000 130/70
－
17(CMAD01) vacuum tire
1
3
1100100-600000 KD150
－
U rear brake disc (230 × 4.5 / KD)
1
4
1274200-058000 ABS induction ring (60 teeth)
1
5
1251100-117093 Non
－
standard inner hex bolt M8×25(color zinc)
5
22
～
24N·m
Fig.4 REAR WHELL
COMPONENT
Rear wheel component 2
PROCEDURE:
●
Disc brake plate, ABS gear ring
Using 6# inner hexagon socket remove bolts
⑸
,remove ABS gear ring
⑷
and disc brake plate
⑶
.
●
Tire and wheel component
Remove the Tire pressure sensor
⑹
built-in valve cap
①
use a tool to release the air, then use a professional tire
puller to remove the rear tire
⑵
. Be careful to avoid the tire pressure sensor. Finally, use a 12# torx wrench to
remove the valve nut
②
and the flat washer
③
, and then remove the tire pressure sensor
④
.
CAUTION:
●
Be careful while disassembling the tire and rim in case of damages on the components.
●
After changing the tire, check air proof performace and dynamic balance.
●
Not enough tire pressure can cause abnormal wear and tare. Too high pressure in summer might have
possibility of tire bursting.
●
It needs running-in for about 300km after changing new arresters. During this period, leave enough braking
distance while riging.
●
The tire repair fluid should not be used because it will block the stoma of the pressure monitoring
sensor,resulting in dificulty in inflating or failure of tire pressure momnitoring .
●
Maintenance
Tire: Check regularly the tire on cracks and air pressure.If the tire is ware to the marker, change the tire with
same specification. See details in user manual. Ingradiant of tire include semi hot melt rubber. Area with too high
temperature is not suitable. If temparature of outdoor is too low, storing the motorcycle in warm place or indoor
is suggested in order to avoid frost crack. Normal temperaturestandard 250kPa.
Rim: Check if the rim has deformation or crack. Support the rim horizontally and check if it can rotate
smoothly. Specification of oil seal on rear rim is φ42×φ28×7. Bearing type: 6204-2RS.
Disc brake plate: Thickness can not be less than 4mm. If not, change it.
2
1091200-034000 KD150-U black rear vacuum spoke wheel (3.5×17/
11.5/ without valve mouth)
1
6
1184200-201000
ZT310 tire pressure sensor (straight head
M10/improvement
）
1
