3-INTAKE SYSTEM COMPONENT
16
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1051356-012000
φ42 × 10 pipe hoop assembly
1
2
1050954-009000 YH canister solenoid valve
1
3
1250303-010093 GB6177.1M6
（
color zinc
）
1
4
1221200-130000 KD125-U air filter ( temperature sensor rubber stopper )
1
5
1224100-037000 Grade 0 flame retardant tie (black 3.6×295)
1
6
1221200-055000 KD150-U carbon canister (EFI)
1
7
1050961-004000 Air filter intake air temperature sensor
1
8
4041201-332000 ZT150
－
U External oil and gas separator assembly
1
9
1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
3
10
1251300-063093 Plywood M6×11×15
（
color zinc
）
3
Fig.1 INDUCTION
SYSTEM COMPONENT
The air filter assembly
PROCEDURE:
●
YH canister solenoid valve
First pull out the plug in canister solenoid valve,and then pull out the oil pipe
③
connecting the fuel tank after
the oil tank is removed. and unplug the oil pipe
①
connecting the carbon canister to the solenoid valve and the
oil pipe
②
connecting the solenoid valve to the throttle body respectively.
Use 10# wrench to remove the bolt
⑶
,remove the canister solenoid valve
⑵
.
●
Air filter
Pull out the air filter inlet air temperature sensor.
Remove the side cover, seat cushion, rear shock absorber, rear tail skirt, etc. to facilitate subsequent
disassembly of the air filter and throttle body.
Remove the Air filter intake air temperature sensor
⑺
on the air filter
⑷
.If the sealant
⑦
falls off when ou pull
out the sensor
⑺
,plug it back to the original position.
First use 4# inner hexagon to remove the 3 bolts
⑻
on both sides of the frame.
Loosen the hose clamp assembly
⑴
at the end of the air filter and move the clamp out toward the air filter, and
pull out the air filter outlet pipe from the throttle valve body.
Use pliers to clamp the hoop on the gas separator outlet pipe
⑥
and pull out the gas separator outlet pipe
⑥，
and then plug it with the rubber plug to prevent foreign matter from entering and damaging the engine.
Remove the air filter and carbon canister assembly.
Take off 3pcs plywood
⑽
from the air filter
⑷
,remove the carbon canister
⑹
from the air filter
⑷
.
CAUTION:
●
Regularly check whether the filter element of the carbon tank and air filter is not ventilated, otherwise it may
cause the oil supply to affect the driving experience.
●
The 2 oil pipes of the canister solenoid valve cannot be connected wrongly.
●
Pay attenion to force when removing clamp.
●
It should be no crimp, entanglement and other phenomena.
