7-FRONT FORK COMPONENT
46
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-061093 M6×22 Hex flang bolt thread level 8.8 (color zinc)
1
2
1251100-080094 Non-standard bolt M8×37
2
3
1181200-118000 Wheel speed sensor
（
A
）
1
4
1251100-101000 Non-standard bolt M6×12 (304 stainless steel)
2
5
1224100-037000 Grade 0 flame retardant tie (black 3.6×295)
2
6
1224100-044000 Wheel speed sensor clamp
3
7
1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
6
8
1274100-057095
Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
6
9
1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
6
PROCEDURE:
●
Wheel speed sensor
Pull out the plug of the wheel speed sensor
⑶
; then remove 3 pcs clamp
⑹
. Cut off the belting
⑸
.Using 4#
inner hexagon socket remove bolt
⑷
,take off the bolt
⑶
.
●
Front disc brake caliper
Using 8# sleeve remove bolt
⑴
and using 4# inner hexagon remove bolts
⑷
,so that the caliper will hang down
naturally. It is forbidden to invert the caliper to prevent the air from entering and causing the brake to fail.
●
Front mud board component
Hold the front mud board component with your hand and then remove the 6 bolts
⑺
with a 4# inner hexagon
socket and remove the bushing
⑻
and cushion rubber
⑼
.
CAUTION:
●
The motorcycle support should be fixed during the disassembly process to prevent accidents caused by incline.
●
Disassemble the oil pipe clamp and the sensor wire clamp should pay attention to the strength.
Fig.9 FRONT FORK
COMPONENT
Front mud board & wheel speed sensor component-1
