7-FRONT FORK COMPONENT
42
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1250205-085000 GB70.1M6×70 (stainless steel)
1
2
1131200-027000 KD150
－
G1 right hand guard
1
3
1190100-427000 KD150
－
G1 right rearview mirror (enlarged version)
1
4
1244100-042000 ZT250
－
R right handle bar rubber sleeve
1
5
1134200-028051 ZT250-R right hand rocker(dark gray matte)
1
6
1244100-095000 ZT250
－
S Rearview mirror mounting hole rubber plug
1
9
1250205-031091 GB70.1M6×30(stainless steel)
2
Fig.5 FRONT FORK
COMPONENT
Right hand component
7
1100300-088000 ZT310T-M front disc brake main pump assembly
(without handle)
1
PROCEDURE:
●
Hand guard
Using 5# inner hexagon socket remove bolt
⑴
,take off the hand guard
⑵
.
●
Rearview mirror,right handlebar to put rubber sleeve
Using 5# inner hexagon socket remove bolt
①
,take off the rearview mirror
⑶
,then take off the rubber sleeve
⑷
.
●
Generation right hand switch
Find and press the snap indicated by arrow
①
,then take off the plug of the generation right hand switch
⑻
.
Hold the front disc brake main pump
⑺
with one hand, and remove the bolt
⑼
with a 5# inner hexagon socket.
remove the generation right hand switch
⑻
.
CAUTION:
●
Remove the head part component first.
●
The motorcycle should be fixed after horizontal support.
●
Periodically check that the fluid level of the brake fluid is between 3/4 of the observation window.
●
Do not flush the cup directly with high pressure water.
●
The small spacer of the rear view mirror anti-rotation limit slot needs to be aligned with the slot on the mirror
bar bolt.
●
The right handlebar refers to the switch to replace the throttle line.
●
The joint between the front disc brake main pump and the half cover should be aligned with the right hand to
match the triangle on the switch.
8
1186200-012000 ZT310T-M second generation right hand switch (dark
gray TFT-500)
1
