5-PEDAL COMPONENT
28
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-121093 Non
－
standard bolt M6×25 (environmental color zinc)
2
2
1251100-131000 Non
－
standard shaft position bolt M10×1.5×36(zine)
1
3
1271200-164000 KD150
－
U brake pedal(dark gray)
1
4
1260100-119093 ZT310
－
R Brake footrest torsion spring (color zinc)
1
5
1251500-060095 Non
－
standard flat padφ10.5×φ26×1(zine)
1
6
1251100-101000 Non
－
standard bolt M6×12 (304 stainless steel)
1
7
1271200-087000 KD150
－
U rear disc brake oil cup bracket
1
Right footrest component-2
Fig.3 FOOT PEDAL
COMPONENT
PROCEDURE:
●
Rear disc brake pump assembly
Using 6# inner hexagon socket remove bolts
⑴
.Rear disc brake oil cup can never be lower than oil tube .
●
Brake pedal assembly
Using 8# inner hexagon socket remove the bolt
⑵
; pull out the brake pedal
⑶
; take off the brake pedal spring
⑷
and the washer
⑸
.
●
Rear disc brake oil cup holder
Using 4# inner hexagon socket romove the bolt
⑹
,take off the oil cup bracket
⑺
.
CAUTION:
●
Applying lubrification on inner surface of brake pedal bush can reduce resistance on brake pedal.
●
While reassembling,remember to insert the spring into spacing hole of foot pedal holder.
●
Support the motorcycle properly while disassembling in case it falls down.
●
Place properly the disc brake oil cup and main pump. Avoid the air on top of oil cup getting into the tubes of
disc brake.
●
The bolt
⑵
should be checked regularly for looseness and thread fastening adhesive is recommended.
