11-REAR COVER COMPONENT
73
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1251100-102000 Non-standard bolt M6×16
（
304 stainless steel
）
3
2
1274100-057095
Flanging bushing φ6.2×φ8.4×3.5
＋
φ14×1.5
3
3
1244100-052000 Buffer rubber of flanging bushing
（
φ8.5×φ14×1
）
3
4
1221200-074000 KD150
－
G1 Rear mud plate bottom cover
1
5
1251300-063093 Plywood M6×11×15
（
color zinc
）
3
6
1171200-060000 KD150
－
G1 Rear Taillight
1
PROCEDURE:
●
Taillight assembly
Use a 4# inner hexagon to remove the bolt
⑴
in Figure A, remove the flanging bush
⑵
and the cushion rubber
⑶
, and then take out the bottom cover plate
⑷
of the rear mud plate.
Use 4# inner hexagon to remove bolt
⑴
in Figure B.
Unplug the tail light plug at
①
.
Use 4# inner hexagon to remove the bolt
⑴
in Figure C, remove the flange bushing
⑵
and the cushion rubber
⑶
, then the rear tail light can be removed. Remove the splint
⑸
.
CAUTION:
●
When installing the rear taillight, the grooves at
②
and
③
must be inserted into the rear fender.
●
The cushion, rear armrest need to be removed in advance.
●
The material should be protected during discomponent to prevent scratching the lamp.
●
Never pull the cable directly.
Fig.3 REAR COVER
COMPONENT
Taillight component
