11-REAR COVER COMPONENT
75
CHK
ADJ
NO.
PART NO.
PART NAME
QTY
CAUTION
1
1221200-115000 KD150-G1 turn light decorative cover (set)
2
2
1170300-065000 HJ125
－
K rear left turn signal light
1
3
1170300-066000 HJ125
－
K rear right turn signal light
1
4
1174200-021000 ZT310
－
X Liensed lights
1
5
1221200-073000 KD150
－
G1 rear mud board
1
PROCEDURE:
●
Turn signal light decorative cover
Unscrew the 2 screws that come with the turn signal decorative cover, and remove the turn signal decorative
cover.
●
Turn signal light assembly
Use a 17# torx wrench to remove the 2 nuts that come with the turn signal, take out the spring washer and
gasket, and remove the left and right turn signal.
●
License light assembly
Remove the 3 self-tapping screws that come with the license plate light with a cross-shaped screw, and take out
the license plate light.
CAUTION:
●
Never pull the cable directly.
●
The taillight assembly, rear armrest need to be removed in advance.
●
When reassembling, check whether there is any pressure on the wire to prevent short circuit when tightening
the bolt.
●
When assembling self-tapping screws come with the license plate light, it must be perpendicular to mounting
surface, otherwise it will bedamaged,and the torque should not be too large.
Fig.5 REAR COVER
COMPONENT
Rear mud board assembly 2
