ZKTeco White LCD Series, Руководство пользователя

Страница: 35 / 136

4. Device Settings
Change the daylight saving time to
Yes
, after setting completed, press
OK
to save, this setting will take effect. If you change it to "
No
", then
daylight saving time function will be ineffective.
2) After the daylight saving time function is activated, it is need to
configure starting and end time of daylight saving time. There are two
modes of setting the time: Mode 1 and Mode 2.
If you choose mode l that is defaulted by system: Its time format shown
as " the month, day hours: minutes"
If you choose the mode 2 of the daylight saving time, its time format
shown as "Month - Weeks- week hours: minutes" mode.
The allowed input range is 1-6 for the number of weeks (WS), if you
input 1 means the first week, input 2 for the second week, and so on.
Allow to input range is 0-6 for each Week (WK), if you input 0, 1, these
0, 1 respectively represent the Sunday, Monday, and so on.
We take 4:00 on September 1, 2008 (i.e., in September 2008 the first
week of the week 6) as an example, these two models of Mode 1 and
Mode 2.
DLST ▼
► DLST Y
Date Fmt Mode1
Enter DLST
Standard
MM-DD 24H
9-1 04: 00
ESC OK
MM-WS-WK 24H
9-1-6 04: 00
WK(0: Sun 6:Sat)
ESC OK
Mode 1 Mode2
- 29 -