ZKTECO White LCD Serials User Manual
Net speed Auto
IP address
Net Mask
Gateway
TCP/IP Y
RS232 N
RS485 N
Link code 0
Extern Modem Y
The device fully
supports
RS232, RS485, TCP/IP,
whether the device
are used to a Single Unit or Link to Networking, it will satisfy the user’s
demands.
1. Baud Rate:
There are five options, 9600, 19200 38400, 57600
115200; this means the speed of communication.
2. Device Number:
Identity ID, the range is
1 to 255
;
3. DHCP (Dynamic Master Configuration Protocol)
★
:
Whether
start DHCP function in the fingerprint device.
4. IP address
★
:
It defaults to IP address is 192.168.1.201;
5. Net speed
★
:
The Net default Speed is Auto, its option is 10M-F,
10M-H, 100M-F, 100M-H
;
6. Net Mask
★
: The Net Mask default is 255.255.255.0, as you need to
change it;
7. Gateway
★
:
It default to Gateway is 192.168.1.1. As you need to
change it;
8. Ethernet
★
:
Whether use TCP/IP protocol or not;
9. RS232:
Whether use RS232 or not;
10. RS485:
Whether use RS485 or not;
11. USB
★
:
The use of USB communication, if you use USB
communications, it would be the choice is "Yes", otherwise voted "No"
12. Link code:
It defaults to code is 0, but it can be set up.
13. Extern Modem:
If this item is set as Yes, this fingerprint device
- 40 -
Содержание White LCD Series
Страница 2: ......
Страница 51: ...4 Device Settings 4 5 2 Access Verification Flow 45...