ZKTeco White LCD Series, Руководство пользователя

Страница: 89 / 136

12. Appendix
Status Key
When the attendance device under using, the different state corresponds
to the different event, according to different situation a job state will be
divided into: clock in, clock out, overtime check-in, overtime check out,
going out, return in and so on. For the access control device in out
condition is divided into “comes in” and “goes out” the different
situation.
On some device keyboards there are 6 conditions keys to set the current
condition. You may press “
▲ ” and “ ▼ ” turn the page to choose
condition. But these ways need manually set, namely some condition
needs to be used according to corresponding state button. In order to
reduce the manual operation, we also could specially develop time state
selection function, upon arrival the set time by user; the device could
automatically switch current condition and show in the initial interface.
If needs to custom-made the device with the time alteration function,
please contact us for custom-made. For the detailed steps of operation
see
4.2.2 Time Status Selection .
Time Ring
In many factories, ringing apply to broadcast message to inform
employee their duty are on or off, the traditional way is to ring bell by
manual or special electron device. We have already embedded the time
ring module into the fingerprint T&A system, you may benefit from this
low cost and convenience management. There are two options, Bell
schedule and Bell duration in the fingerprint device time bell ring
provide with. The system totally has eight Bell schedule to set,
according to actual need you may set time bell, when the time arrive at
the appointed time, the fingerprint device will automatically ring the bell,
- 83 -