ZKTeco White LCD Series, Руководство пользователя

Страница: 34 / 136

ZKTECO White LCD Serials User Manual
4.1.4 Lock
★
The Lock means the duration of lock drive, fingerprint device controls
the time how long to open electronic lock. Select this option, and press
OK
key to enter setup, select number through digital key, press
ESC
to
exit and save the setting.
This duration criterion unit is 20 ms, which max value is 254.
“0” means this function is closed
Note:
This is an optional setup, this option only exists in the
fingerprint device that own simple or advanced access control
function. Above parameter of the duration of lock drive follow that
standard approved for use with this device. If you want to use much
wider parameters, please contact our market supporter or salesman.
4.1.5 Unlock
★
This option means how many personal can unlock the door. Select this
option, and press
OK
key to enter setup, select number through digital
key, press
ESC
to exit and save the setting.
The default value is 1, that means only one user is able to unlock when
his verification is positive, if this value is set as 3, that means the
fingerprint device send a unlocking signal till only all three user verify
successfully, the interval of each personal is on more than 30 seconds.
The max value set as 5 is available.
Note:
This is an optional setup, this option only exists in the
fingerprint device that own advanced access control function.
4.1.6 Daylight Save Time
★
Enter the
Menu -> Option -> System Option -> Daylight Saving
Time
.
1) The option can be set in the menu, as the following figure:
- 28 -