ZIEHL-ABEGG ZA dyn 4B 110, Оригинальная инструкция по эксплуатации

Страница: 94 / 200

Parameter Designation Value range
Factory set-
ting
f_PWM_H
Maximum cycle frequency (start frequency) at parameter setting
"M_PWM=Auto"
Parameter is only shown for "M_PWM=Auto".
2.5 ... 16.0 kHz 16.0
UDC_N
DC voltage for the DC-link
100 ... 600 V 565
UDC_MIN
Minimum limit value of the DC-link voltage
30 ... 500 V 450
UDC_MAX
Maximum limit value of the DC-link voltage
300 ... 800 V 760
FAN_T
Power stage temperature at which the fan is switched on
28 ... 45
°
C 33
10.22 Menu checks
Selection of supporting tests during acceptance of the system:
• Testing the protective device in compliance with EN81
Parameter Designation Value range
Factory set-
ting
SCY_EN
Enabling of the test functions
On:
Functions are accessible
Off:
No access to the functions
After a test function has been performed, this parameter
automatically adopts the "Off" value.
On
Off
Off
SCY_ENC
Rotary encoder test
On:
Failure of the rotary encoder is simulated
Off:
Function deactivated
On
Off
SCY_TMP
Motor temperature test
On:
Failure of the motor temperature module or overtemperature
on the motor is simulated
Off:
Function deactivated
On
Off
SCY_A3
Testing the protective device in compliance with EN81
No current:
Movement of the car by releasing the brakes with-
out power to the
fi
nal stage
max. accel.:
Cabin is accelerated to maximum under full power
Off:
Function deactivated
No current
max. accel.
Off
Off
SCY_SG
Capture device test
On:
electronic short-circuit is deactivated
Off:
Function deactivated
On
Off
SCY_DA
Driving ability test
On:
Travel with recovery with applied counterweight, display of
cabin movement
Off:
Function deactivated
Only for CAN actuation.
On
Off
SCY_MB
Motor brakes test
On:
Interruption of the safety circuit, display of braking distance
Off:
Function deactivated
Only for CAN actuation.
On
Off
Original operating instructions
ZAdyn4B 110-180
Parameter list
R-TBA15_01-GB 2014 Index 005 Part.-No. 00163453-GB
94/200