ZEISS
5 Commissioning and First Operating Steps | 5.8 Working with Optional Accessories
5.8.1.2.3 Controlling the Valves without Airlock Macros
Procedure
1. On the control panel, press
Vent
, to change to
Vent
mode.
Alternatively, click
Vent
in the
Airlock
panel.
à
The gate valve is closed.
à
The airlock chamber is vented with nitrogen.
2. Click
Open Column Chamber Valve
.
à
The column chamber valve is opened.
3. Switch on the EHT. Refer to
.
9
You can now continue working with the microscope.
9
If you acquired an overview image with an airlock camera, you can now navigate the stage by
double-clicking in the overview image.
Instruction Manual ZEISS SIGMA series | en-US | Rev. 7 | 352102-9344-006
117