manualshive.com logo in svg

Zeiss SIGMA Series, Инструкция по эксплуатации

Поделиться
Скачать
Zeiss SIGMA Series Скачать руководство пользователя страница 141

ZEISS

7 Troubleshooting | 7.4 Detectors

7.4 Detectors

7.4.1 Lubricating the Rod

The rod from the aSTEM, BSD4, BSD1, and BSD1-VP detector mechanics need to be lubricated
once a year with TEM oil 300.

Parts and Tools

Designation

Part no.

TEM oil 300

000000-0484-955

Isopropanol

–

Lint-free cloth

–

Lint-free gloves

–

 CAUTION

Contact with 

TEM

 oil 300

TEM Oil 300 may be irritating to the skin and mucous membranes. The separate safety data
sheet contains additional information.

4

Avoid contact with skin.

4

Wear suitable gloves.

4

In case of contact with the eyes, rinse immediately with plenty of water and seek medical
advice.

4

After contact with the skin, wash immediately with plenty of water and soap.

 CAUTION

Isopropanol

Isopropanol is highly flammable and irritating to the eyes.

Vapors may cause drowsiness and dizziness.

4

Wear suitable gloves.

4

Keep away from sources of ignition.

4

Do not smoke.

4

In case of contact with the eyes, rinse immediately with plenty of water and seek medical
advice.

4

Avoid contact with skin.

4

Do not breathe vapor.

NOTICE

Unsuitable lubricants

When using unsuitable lubricants, the vacuum system may be contaminated.

4

Only use TEM oil 300 for lubricating.

Procedure

1. Retract the respective detector.
2. Clean the rod with isopropanol with a clean, lint-free cloth.
3. Spread some drops of TEM oil 300 across the rod.

Use a clean, lint-free cloth.

Instruction Manual ZEISS SIGMA series | en-US | Rev. 7 | 352102-9344-006

141

Содержание SIGMA Series











































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды