Zeiss HUMPHREY 720i, Руководство пользователя

Страница: 30 / 328

GENERAL OPERATION
REV. B 02/03 PN 51680-1 HUMPHREY FIELD ANALYZER II -
i
series
2-4
The information The “ i ” button is present on most screens and can be found in the upper left corner of the
“i” button screen. Pressing this button brings you to the Unit Configuration screen which contains
information useful when contacting Humphrey Customer Service. If the video eye monitor is
displayed, you will need to turn the monitor OFF to access the “
i ” button.
The following information is displayed when the “ i ” button is pressed:
Model Number
Serial Number
Operating System-Revision Number
Language
Hardware Options
Software Options
Personalized Information such as user’s name, address, and telephone number.
The Unit Configuration information may be printed by pressing the PRINT button. To return to
the previous screen, touch CANCEL.
Figure 2.2: The Unit Configuration Screen.
Touch screen Operating the HFA II is literally at your fingertips. You can perform all functions, whether
entering data or selecting a test, by simply touching a command button on the touch screen.
While using the touch screen, the HFA II is activated when your finger is removed
from the button you select.
Be careful not to pound or press too hard against the
touch screen. A light touch works best. An audible beep will alert you of successful button
activation.
If you have difficulty activating the touch screen, consider re-calibrating it. Details on
calibrating the touch screen are found in “Additional Setup” later in this section as well as in
Section 12: “Touch Screen Calibration”.
2.htp 3/14/03, 1:50 PM 4